On the Vision System these buttons sit under the HMI screen. Before starting, close access doors and put the HMI in Auto mode.
(1) Cycle Start — Press and hold to start the running sequence. The machine starts in Auto mode.
(2) Cycle Stop Reset — Press to stop after the current cycle, or to clear active alarms and warnings. A second Cycle Stop Reset is above the e-stop on the sorter.
(3) System On — Press to power on from a powered-down state. After a door or e-stop trip, this resets the status bar. Lock all doors and clear alarms before resuming.
(4) Emergency Stop — Immediately ceases all machine operations. Use Cycle Stop — not E-Stop — in all non-emergency situations.